BACK
Standalone Single Door Access Control Systems
Indoor PIN Controller 500 PIN users, case tamper, requires 12-16VDC regulated power input, 3.5 Amp Form C electronic strike relay, 1 Amp Open Collector PGM, 3 security levels and 3 user levels, 4-wire terminal block interface.
Features:
- Standalone Operation
- 2 System Codes
- 500 Individual Users
- Three Modes of Operation
- Bell and Chime
- Tamper
- Built-in Electronic Relays
- Exchangeable Cabinet Cover
- User Friendly
Related products
-
Prox & Pin Stand-alone Controller
An Indoor/Outdoor PIN Mullion 2×6 Controller with Red backlit keys. for applications with frequent night time traffic and dark difficult visibility, in residential, commercial, and indoor Industrial applications.
Features:
- 500 PIN users
- (2x) 5A Output Relays
- 2 Inputs
- 3 security modes and 3 user levels
- Weather-resistant housing
- Large RED ILLUMINATED KEYS
- 2 Bi-Color LED Menu
- Fully Potted
- Rated IP65
- Optical Back Tamper
- 12-24 VAC or 16-24 VDC Input
- 10-Wire Interface (10 Colors / Label on Back Of Unit)
-
Microlatch Fingerprint Wireless Access Control
Features:
- Typical 30 Templates Storage On-board
- System Status & User Configuration via 3 Colour LEDs
- 2 Master Administrators
- Duress Alarm Finger Output
- Individual Add/Delete Users with Simple User Interface
- Always On. No Latancy for Waking Up from Quiescent State
- Tamper Output
- Water Resistant to IP53
-
JA Series Colour Audio Video Entry Intercom
Features:
- Pan⁄Tilt door stations
- 2 video door stations and up to three internal stations
- Clear crisp colour inage with 100mm TFT colour LCD
- Handsfree communications
- Model JA2MECD fitted with digital picture memory
- All Call allows internal communications
- Choice of 2 door stations including semi flush and surface mount models
- Compatible with JB door stations
- White LED illumination for low light viewing
- NTSC composite video output
- Two inputs for CCTV Camera (requires a JAWAZ for each camera)
-
EL 2200 Access Controller
Features:
- Large Memory : Stores up to 12,800 user cards and 4,000 transactions
- Stand-alone or network operation via PC
- Modem Support : May be programmed to initiate dial up sequence to a remote PC
- 22 types of events are distinguished, and can be logged selectively
- 6 open collector outputs can be toggled or pulsed by timer or any of the 22 events
- PIN only, Card only, and Card Plus PIN Operation Modes
- Lock-out of a card when its PIN is wrongly entered repeatedly
- Setting of phone number and dialing commands for direct linking to modem
