CL 1510 ⁄ 2000
CL 1510 ⁄ 2000
If you are looking for a larger solution to your automatic gate opening problems, then the CL 1510 and CL 2000 could be the right solution for you. Designed to be used for industrial applications, the CL 1510 and 2000 can operate up to 450 cycles ⁄ day. It can be used on existing or new gates, with ease and reliability. If you would like that extra bit of power and operating ease, the CL 1510 and 2000 models are for you.
Related products
-
AT88T
- Gear motor for sliding gates up to 4000 kg.
- Intensive use.
- The most powerful APRIMATIC gear motor.
- Maximum power and reliability for heavy-duty use.
- Customised key emergency unlocking system to release the gate in the event of a mains power failure and to protect against unwanted entry.
-
CL 610 / 1010
This is so called the ‘classic line&rsq of products. The CL 610 and 1010 is suggested for domestic and small collective applications. The motors dimension allows physical applications to take place in small or reduced areas. It is suggested that a good quality gate be used, one that is rigid and operates smoothly in mechanical mode.
Features:
- Reduction gear operators with magnetic limit switches and with⁄without built in electronic control unit
- Slowing down system on opening and closing operations
- CL 610 400Kg max gate weight
- CL 610 40 Cycles per day
- CL 1010 800Kg max gate weight
- CL 1010 – Up to 250 cycles⁄day without built in electronic control unit
- Manual disengage in case of emergency
- Accessories can be added
CL 610 and 1010
A Reduction gear motor
B Built in electronic control unit
C Pluggable radio receiver
D Radio remote control
E Radio antenna
F Rack
G Safety photocells
H Key switch
I Warning light -
Slider
Slider
- Gear motor for sliding gates
- Residential use up to 300 Kg.
- Reduced noise level and maxium function for residential use.
- It is a silent and highly-functional gear motor, ideal for residential applications.
- Maximum safety thanks to the electronic control device built-into the gear motor with electronic torque adjustment incorporated.
- Additional board can be connected as an optional for auto-reverse system in the event of obstacles.
-
AT80
- Gear motor for sliding gates.
- Intensive use up to 800 Kg, residential use up to 1200 kg.
- AT 80 is silent and highly-functional, whatever the temperature: from -20° to +70°C, thanks to the oil bath gear motor, with irreversible reduction unit eliminating the need for additional locking systems.
- Auto-reverse safety is ensured by an adjustable oil bath clutch which reduces the trust force of the gate as it moves if it meets an obstacle.
