ZT 44 RF ⁄ ZT 40 RF
Double valve flow adjustment device for regulating gate opening and closing speeds. Compensates for the unbalanced loads created by wind and out of plumb installation of very light and medium heavy gates.
Related products
-
B 310 / B 410 – Telescopic arm
The open line electromechanical actuators range is designed for domestic applications. The choice of the actuators is bound up with the gate and pillars features. Sturdy and reliable, they are suitable for existing or new gates (1 or 2 leafs). Good quality leafs are required (rigid), the gate must operate smoothly when it’s moved manually.
Features:
- B 310 and B 410 are electro-mechanical self-locking actuators with worm drives, suitable for the automation of side-hung gates or doors with either single or double wings.
- They are available in the following versions:
- B 310 electro-mechanical actuator, with a 310mm, travel, self-locking, for use on the right-hand gate wing (seen from within), for wings not exceeding 3m in length.
- R 310 electro-mechanical actuator, with a 310mm, travel, unlocking version, for use on the left-hand gate wing (seen from within), for wings not exceeding 3m in length.
- B 410 electro-mechanical actuator, with a 410mm travel, self-locking, for use on the right-hand gate wing (seen from within), for wings not exceeding 4m in length.
- R 410 electro-mechanical actuator, with a 410mm, travel, unlocking, for use on the left-hand gate wing (seen from within), for wings not exceeding 4m in length.
Actuators B 310 & B 410
A: Electromechanical Actuators
B: Electronic control unit
C: Pluggable radio receiver
D: Radio remote control
E: Antenna
F: Safety photocells
G: Warning light
H: Radio digicode
I: Digicode protection caseFor unlocking versions
J: Automatic stopper
K: Electrical lock -
BR615 ⁄ GR100 – Articulated arm
BR 615BR 615 is self-locking motor which does not require an electrical lock. The disengagement system is easily accessible without removing the cover. The BR 615 includes built-in opening and closing limit swithces that avoid gate efforts against the ground stoppers; which typically designed for light gate.
GR100Electro electro-reducers with articulated arms for wing gates. Non-reversing electro-mechanical actuators with articulated arm for swinging gates (left or right) – max. Length 2.5 m. and max. Weight 250 Kg. Available with 220 or 12 Volts. Very silent. Operating in very diverse climatic conditions. Easy release. Montable on narrow pillars (min.170 mm).
-
-
EM 324
EM 324
- Non-reversible 24V DC.
- Electro-mechanical operator.
- For swing gates up to 3 metres.
- Residential use.
- Maximum safety guaranteed by low voltage.
- Service continuity guaranteed in case of power failure by an optional emergency battery unit.
- Innovative design.
-
GR 200 ⁄ GR 450 ⁄ GR 600
GR 200
- Reversible and irreversible electro-mechanical actuators for wing gates.
- Max. length 2.5 m. and max. weight 250 Kg. Piston stroke 300 mm. Available with different voltages. Very silent. Operating in very diverse climatic conditions. Easy release in case of need.
GR 450
- Reversible and irreversible electro-mechanical actuators for wing gates.
- Max. length 4.0 m. and max. weight 250 Kg. Piston stroke 400 mm. Available with different voltages. Very silent. Operating in very diverse climatic conditions. Easy release in case of need.
GR 600
- Reversible and irreversible electro-mechanical actuators for wing gates.
- Max. length 5.0 m. and max. weight 250 Kg. Piston stroke 600 mm. Available with different voltages. Very silent. Operating in very diverse climatic conditions. Easy release in case of need.
